ROCKFORD FOSGATE - RFK-HD14M5
ROCKFORD FOSGATE - RFK-HD14M5
- 2014+ Harley-Davidson Road Glide, Street Glide, Ultra & CVO Amp Install Kit (Gen-3)
- This complete kit includes a heatsink, bracket, hardware and wiring harness needed to install the M5-800X4 amplifier on select 2014 and newer Harley-Davidson® motorcycles. T-Harness allows for complete electrical integration without cutting or modifying factory wiring. Includes Boom!™ Audio bypass plugs for factory Harman Kardon® amplified systems and a Digital Signal Processor loop-thru for adding a DSR1 signal processor.You must flash your factory radio to use this kit. Ready to flash? Here’s a list of dealers that can flash your radio. Refer to our COMPATIBILITY chart to verify fitment before purchasing.Harley-Davidson® , Road Glide®, Street Glide®, Electra Glide® and Boom!® Audio are registered trademarks of Harley-Davidson Motor Company. CVO™ is a trademark of Harley-Davidson Motor Company. Harom Kardon is a registered trademark of Harman/Kardon International Industries, Inc.
-
General Features
- FULL spec cable - meets or exceeds AWG (American Wire Gauge) requirements
- Plug and Play design for easy installation
- 100% Pure Crystal-Oxygen Free Copper (PC-OFC)
- 90-degree harness included with amp install kit for Road Glide® installations
- Y-adaptors included in amp install kit supports expansion of lower fairing, saddlebag, or Tour-Pak® speakers
- Designed for use with 2014-Current Harley-Davidson® Motorcycles
- Designed for use with M5-800X4 amplifier
- Designed for use with TM400X4ad amplifier
- Includes mounting brackets for Bat Wing and Shark Nose fairings
- T-harness integration supports front/rear fader control (requires "Rockford Fosgate 2014+ All Bikes" flash)
- Includes Boom!™ Audio bypass plugs for factory Harmon/Kardon® amplified systems
- Factory Harley-Davidson® radio must be flashed to use this kit
Technologies
CTA-2015
Rockford Fosgate cables conform to the CTA-2015 industry standard. The standard specifies the exact amount of copper needed to indicate a specific wire diameter or gauge size (8 AWG, 4 AWG, etc). Some manufacturers substitute thicker insulation for copper. With Rockford Fosgate, you get exactly what you pay for.
Includes Power Wire
This amplifier kit includes power wire by including necessary cable for both B(+) and GND(-) connections. Additionally, amplifier kits include remote turn-on power wire. All cables in this kit conform to the CEA-2015 AWG specification.
This amplifier kit includes fused distribution. It utilizes a stand-alone fuse holder that can be installed in a convenient place under the hood.
Specifications
- Battery PWR/GND Gauge
- 8 AWG
- Fuse Size
- 60 Amp
- Fuse Type
- MAXI
- Amplifier PWR/GND Gauge
- 8 AWG
- Speaker Wire Gauge
- 16 AWG
- Dual Amp Installation Kit
- No
Compatibility
Compatible Harley-Davidson® Motorcycles
| YEAR | MAKE | MODEL | CHASSIS | FAIRING |
|---|---|---|---|---|
| 2014-current | Harley-Davidson® | Street Glide® 1 | FLHX | Bat Wing |
| 2014-current | Harley-Davidson® | Street Glide® Special1 | FLHXS | Bat Wing |
| 2014–current | Harley-Davidson® | Electra Glide® Ultra Classic®1 | FLHTCU | Bat Wing |
| 2014–current | Harley-Davidson® | Electra Glide® Ultra Limited1 | FLHTK | Bat Wing |
| 2017–current | Harley-Davidson® | Electra Glide® Ultra Limited Low 1 | FLHTKL | Bat Wing |
| 2015–current | Harley-Davidson® | Tri Glide® Ultra Classic®1 | FLHTCUTG | Bat Wing |
| 2015–2020 | Harley-Davidson® | CVO Street Glide® (4-speaker)1 | FLHXSE | Bat Wing |
| 2018–2020 | Harley-Davidson® | CVO Street Glide® (6-speaker)1 | FLHXSE | Bat Wing |
| 2014–current | Harley-Davidson® | CVO™ Limited1 | FLHTKSE | Bat Wing |
| 2016–current | Harley-Davidson® | CVO™ Ultra Limited1 | FLHTKSE | Bat Wing |
| 2014–current | Harley-Davidson® | CVO™ Ultra Limited Electra Glide1 | FLHTKSE | Bat Wing |
| 2015-current | Harley-Davidson® | Road Glide® 1 | FLTRX | Shark Nose |
| 2015-current | Harley-Davidson® | Road Glide® Special 1 | FLTRXS | Shark Nose |
| 2015–current | Harley-Davidson® | Road Glide® Ultra1 | FLTRU | Shark Nose |
| 2018–2020 | Harley-Davidson® | CVO Road Glide® (4-speaker)1 | FLTRXSE | Shark Nose |
| 2015–current | Harley-Davidson® | CVO™ Road Glide® Ultra1 | FLTRUSE | Shark Nose |
1 Requires factory Harley-Davidson® radio to be flashed. Read more here.
This amplifier installation kit is designed to interface only with the below aftermarket amplifier and Harley-Davidson® motorcycle. If your existing amplifier and motorcycle are not listed below, it is not compatible.
Kit requires factory Harley-Davidson® radio to be flashed.
Required Amplifier
 AMPLIFIER MODEL |
DESCRIPTION |
|---|---|
| M5-800X4 | Element Ready™ IPX6 800 Watt 4-Channel Amplifier |
| TM400X4ad | Power Marine 400 Watt Class-ad 4-Channel Amplifier |
Support
Return Authorization
Contact the Authorized Rockford Fosgate Dealer you purchased this product from. If you need further assistance, call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of product to Rockford.
Exceptional Sound Quality
Auto Sound Design – a friendly, locally-owned company specializing in audio installation and equipment. We value quality and believe that our customers should have the best sound systems in their vehicles. Our top of the line technologies and personalized solutions make us a top choice for anyone looking to upgrade their audio system in their vehicles, we even do audio installations for boats!
FAQs